Vinyl Decal

Permanent, outdoor, UV resistant vinyl.

All animal prints come on same size sheet and amount of individual prints varies based on chosen size.

Decals are designed to be stuck on the outside so they are not limited to windows, if you want to stick inside a window and decal has text select mirrored.

Width/Height of decal depends on the style chosen. Some designs are narrower than others. Sizing is based on the length of the decal. Sizings have an approx paper size for your reference is get an idea of general sizing.

Sizes

Animal prints: 20cm (L) x 8cm (W)

Small: 14cm (L) x 5-10cm (W) (Approx. A6)

Medium: 20cm (L) x 10-15cm (W) (Approx. A5)

Large: 30cm (L) x 15-20cm (W) (Approx. A4)

Instructions (comes with decal)

• The decal has 3 layers. The top, clear transfer film, the cut vinyl design, the white backing sheet.
• Animal print lengths can be cut to down. Please cut transfer layer and backing layer together and around the animal prints.

1. Clean and dry area decal is being added to.
2. Ensure decal is firmly pressed onto the transfer film. On a flat hard surface, rub or press the transfer film either with fingers or something such as a plastic scraper. Focus on any intricate or small components and the outer edges.
3. Carefully peel the backing sheet off. If any vinyl is still stuck to the sheet, DO NOT CONTINUE PEELING. Place the backing sheet back down and keep rubbing the transfer film to ensure vinyl is stuck to it.
4. Position transfer film and decal and once happy stick one side or corner down, usually the top but this may depend on what you are stick it to.
5. Press the whole area first stuck and while holding the other side of the transfer sheet a little bit off the area, press the transfer sheet down along the decal to ensure no air bubbles. If the decal is wide you may need to also go outwards every so often as you work your way across the decal.
6. Once the decal and transfer sheet is stuck, ensure a good stick by rubbing the decal similar to step 2. 
7. Carefully remove the transfer sheet from the vinyl decal. If any part lifts with the transfer sheet, DO NOT CONTINUE PEELING. Place the transfer sheet back down and keep rubbing the transfer film and try again.
8. Enjoy your new decal!